A high-carbon, cold rolled steel containing approximately 0.50% carbon that can be hardened by heat treatment to a maximum hardness of approximately Rockwell C 58.
Soft annealed high carbon steel is meant for uses requiring moderate forming, while soft spheroidized annealed product is meant for uses requiring maximum cold forming.
The manufacture of blades, brackets, brake discs, clips, clutches, springs, washers and gears and for a wide range of uses that can make use of its good combination of mechanical properties.
We will be glad to help you select the exact grade for your needs.
- Strength, Yield Strength ksi (MPa), Tensile Strength ksi (MPa): Strong, 65 (380-550)
For higher strength and lower weight, consider High-strength, Low-alloyx
- Formability: % Elongation: Very Good, 23-25%
For even better formability consider Drawing Steel
- Joining – Very Good
may normally be welded without special precautions using any of the standard arc or resistance welding methods.
- Corrosion Resistance – Good
Galvanizing will slow corrosion. For longer life in harsh chemical conditions, consider Galvanized or Coated Steel
- Chemistry – A ‘plain’ steel without expensive alloying elements
- Cost – Relatively low.
Good when thinner, stronger, or more formable steels will not add value.
Explore Our Available Steel Products & Grades
Our knowledge and experience give nearly 100% accurate delivery of High Carbon, Low Carbon, Stainless Steel products processed and packaged to your exact specifications.